Size: approximately 1.75 In tall (44.45mm) x .5 in wide (12.7mm). NOTE: the top of the L is only 4mm wide, so I recommend layering this piece and not drilling directly into it.
NOTES ON USAGE FOR IMPRESSION CUTTERS: For thickness, I use my 0 or 1 setting on my pasta machine as the impressions will be 1.5mm deep into the clay. You MUST roll your clay onto the tile and also use a method to prevent sticking. I prefer to use cornstarch. You can also cover your clay with cling wrap, but this will cause a rounded edge. Press down, wiggle a little, and gently rock back and forth to release. I would also recommend using firmer clay (place in the freezer or refrigerator for a bit if it's soft or sticky).
Jackson & June Polymer Clay Cutters are 3D Printed with PLA. This cutter has a 3.5mm cutting edge. All of our cutters are made to order. Please check the home page for the current cutter processing time.