Size: approximately 1.25 in tall (31.75 mm). I originally made these as a mirrored set, but the difference was minuscule. You can simply turn it around for a mirrored option!
NOTES ON USAGE FOR IMPRESSION CUTTERS: For thickness, I use my 0 or 1 setting on my pasta machine as the impressions will be 1.5mm deep into the clay. You MUST roll your clay onto the tile and also use a method to prevent sticking. I prefer to use cornstarch. You can also cover your clay with cling wrap, but this will cause a rounded edge. Press down, wiggle a little, and gently rock back and forth to release. I would also recommend using firmer clay (place in the freezer or refrigerator for a bit if it's soft or sticky).
Jackson & June Polymer Clay Cutters are 3D Printed with PLA. This cutter has a 3.5mm cutting edge. All of our cutters are made to order. Due to the intricacy of these cutters, extended print time is required. Please check the home page for current cutter processing time.